Select Page

cPCI Serial 3U Load Board

Load boards are essential in keeping any system in top running shape. As a full-system provider, Hartmann strives to not only provide the systems you need, but the supporting hardware as well.

The CompactPCI® Serial Load Test Board serves to simulate loads on CompactPCI® Serial systems. The load board switches itself off at a temperature on the topside of the load test card or in a rack at 120 degrees Celcius +/- 5K. Once cooled, it turns itself back on.

Additional Information

Form Factor


Slot Pitch

4HP (20.32 mm)


simulate resistive loads on CompactPCI® Serial systems for both electrical and thermal conditions


Air cooled (with heat sink)

Permissible Current Load

12V….0A…7.5A in 0.5A steps, 5VStandby…0.2A…ON/OFF 3x

Output Voltages

5VStandby, required

Voltage and Temperature Measurement

4 PTC resistors; one each at the front at bottom and top to allow temperature measurements in chassis condition, Optional DVM plug-on board, Voltage and temperature sense lines are connected to 2 x 8 pin header (X1 connector) on front panel

Thermal Protection

Automatic shut-off if any temperature is exceeding 120°C (+/-5K), Re-energizing after cooling dow


Contact Us

Discover how Hartmann can increase power, speed and rugged durability to your project performance.

Hartmann Electronic

Germany Headquarters
Motorstr. 43
D-70499 Stuttgart, Germany
P:+49 711 13 98 90
North American Office
202 N. Limestone St. Suite 320
Springfield, Ohio 45503
P:+1 937-324-4422
  • Hidden
  • This field is for validation purposes and should be left unchanged.