Select Page

cPCI 6U Series

Hartmann Electronic’s CompactPCI 6U Professional Series features a sleek board design based on High Speed Design concept with exceptionally low-level reflection. The featured reflection levels are achieved by means of uniform signal surge impedance. The design features an energy buffering feature which works across the entire frequency range. This guarantees improved reliability thanks to more stable supply-voltages directly at each slot in conjunction with fluctuating loads. Continuous electrically conductive chassis GND surface located in the area where the backplane is mounted on the card rack. An M3 screw connection is available to connect chassis ground. By installing a connecting bracket or busbar, chassis GND can be connected to ground in a low-resistance star arrangement. Separate 6-pin JTAG boundary scan connector is standard. Faster, simpler system initialization and testing via the JTAG bus when mounted in the chassis is achieved by direct access via an additional connector on the backplane. Main operating voltages are supplied via busbar/screws.

Additional Information

Form Factor

6U

System Slot

Right

Slots

2-20

Slot Pitch

4HP (20.32 mm)

Power Feed

RA Series: Screws, RB Series: ATX, screws

Supply Voltage V I/O

3.3V, 3.3V / 5V fixed or selectable via jumper, 5.0V

Clock Frequency

33 MHz, 66 MHz

Transfer Mode

64 bit

Rear I/O

Yes

PCI to PCI Bridge

N/A

Utility Connector

JTAG, IPMB

Geographic Addressing

Yes

Permissible Current Load

5V up to 8A/slot, 3.3V up to 10A/slot

PCB Design

Optimized for best HF behavior

Base Specification

PICMG 2.0, R3.0

Hot Swap Specification

PICMG 2.1, R1.0

Base Material

Type FR-4 UL 94 V-0

Ohmic Resistance

< 1.5 Ohm

Impedance Z of Bare PCB

65 Ohm

Chassis GND

Continuous chassis GND surface where backplane is mounted to rack, comes with M3 screw for chassis GND

Card Thickness

2.8 (.11")

Connectors

2 mm press-fit, quality grade 2

Terminal, 8 slots

On-board Schottky barrier diodes

Operating Temperature

≤ 8 slots: -40°C … +85°C

Relative Humidity

90%, non-condensing

Part No.HeightSlotsV I/OPower FeedBus WidthClockSystem SlotDatasheet
36RA_ _63146U2-83.3VScrews64 bit33 MHzRight
36RA_ _65146U2-85.0VScrews64 bit33 MHzRight

NA

36RA_ _66146U2-53.3VScrews64 bit66 MHzRight
36RB_ _63146U2, 5, 6, 83.3VATX & Screws64 bit33 MHzRight

NA

36RB_ _65146U2, 5, 6, 85.0VATX & Screws64 bit33 MHzRight

NA

36RB_ _66146U2, 5, 6, 83.3VATX & Screws64 bit66 MHzRight

NA

_ _ = Number of slots

Contact Us

Discover how Hartmann can increase power, speed and rugged durability to your project performance.

Hartmann Electronic

Germany Headquarters
Motorstr. 43
D-70499 Stuttgart, Germany
P:+49 711 13 98 90
North American Office
202 N. Limestone St. Suite 320
Springfield, Ohio 45503
P:+1 937-324-4422
  • This field is for validation purposes and should be left unchanged.