Load boards are essential in keeping any system in top running shape. As a full-system provider, Hartmann strives to not only provide the systems you need, but the supporting hardware as well.
The cPCI Load Test Board serves to simulate loads on cPCI systems. The load board switches itself off at a temperature on the topside of the load test card or in a rack at 120 degrees Celcius +/- 5K. Once cooled, it turns itself back on.
| Form Factor | 6U |
|---|---|
| Slot Pitch | 4HP (20.32 mm) |
| Function | simulate resistive loads on cPCI systems for both electrical and thermal conditions |
| Cooling | Air cooled (with heat sink) or conduction cooled |
| Permissible Current Load | 5V 0A … 8.25A in 0.55A steps, 3V3 0A … 10.36A in 0.7A steps, +12V 1A, ON/OFF, -12V 1A, ON/OFF |
| Control Voltage | 5V, required |
| Voltage and Temperature Measurement | 4 PTC resistors; one each at the front at bottom and top to allow temperature measurements in chassis condition, Optional DVM plug-on board, Voltage and temperature sense lines are connected to 2 x 8 pin header (X1 connector) on front panel |
| Thermal Protection | Automatic shut-off if any temperature is exceeding 120°C (+/-5K), Re-energizing after cooling down |
Discover how Hartmann can increase power, speed and rugged durability to your project performance.
