VME64x Backplanes, 6 + 3U Horizontal

Specifications
  • 6 + 3U VME64x backplane for Horizontal installation
  • With J1/J2/J0 connectors:  2, 4, 8 slots
  • Slot pitch 4 HP (20.32mm)
  • Automatic Daisy Chain with OR gates(electronic), active termination
  • Power monitoring with SysReset
  • FAL signal for power supply units provided to the VME bus as ACFAIL
  • Temperature sensors and connection terminals for fans
  • DIP switch allows selection between two different temperature curves for fans
  • For system assemblies with a fan slot, fan signals are provided by a 14 pole plug
  • Optimized for best HF behavior.  Outer layers designed as shielding areas
  • PCB material FR-4, UL recognized 94-VO
  • Conforms to ANSI/VITA 1.1-1997
  • RoHS compliant
Features at a Glance
  • Board design based on the HIGH-SPEED DESIGN concept.  Low reflection is achieved by means of uniform signal surge impedance
  • Shielding of each individual signal line assures minimal coupling, even when expanded to the 64-bit mode with the 2e protocol (160 Mbytes/s)
  • Backplanes come with active-IN-ON-BOARD termination.  Active termination
  • Active termination offers reduced closed-circuit consumption
  • Backplanes come with Electronic Automatic Daisy Chaining (OR gates are integrated into the backplane)
  • Solid electrically conductive chassis GND surface in the backplane to card rack area for EMC-tight mounting.  HF coupling of card rack and system ground is implemented by capacitors (10nF, 200V in each slot).  A combination M6 screw/Faston 6.3 x .8mm is provided for chassis ground connection
  • Electrical power supply via the P47 power plug-in connector
  • Utility connector included for power supply and external LED’s

 

Orders
Order No. Product Description
2.H0003020 VME64x J1/J2/J0 active termination, 2 slots, 9U, V (I/O) = 5V, 1x P47 connector for 1U system platforms
2.H0006010 VME64x J1/J2/J0 active termination, 4 slots, 9U, V (I/O) = 5V, 2x P47 connector for 2U system platforms
2.H0012010 VME64x J1/J2/J0 active termination, 8 slots, 9U, V (I/O) = 5V, 4x P47 connector for 4U system platforms
Custom Solutions

Hartmann Electronic has been designing custom analog, digital, and mixed signal high-speed boards for over 35 years, with over 5,000 custom designs to date. Using state of the art design tools and fully automated production equipment, we provide custom solutions that fulfill the most exacting requirements with maximum packaging density.

Learn about our custom backplane capabilities