CompactPCI Backplanes, Series RB Professional 3U

Specifications
  •  3U, system slot right, 1 to 20 slots, electrical power via ATX connector and additional busbars/screws for systems with power consumption > 300W

  • Slot pitch 4 HP (20.32mm)

  • 32 and 64bit

  • 33 and 66MHz (< 5 slots)

  • 3.3V and 5V I/O, fixed or selectable via change the coding keys (yellow for 3.3V and blue for 5V)

  • With and without rear I/O

  • With rear I/O without Geographic Addressing

  • Optimized for best HF behavior.  Outer layers designed as shielding areas

  • PCB material FR-4, UL recognized 94-VO, 2.8mm (.11” thick)

  • Conforms to PICMG 2.0 R 3.0, and 2.1 R1.0 (Hot Swap) Specifications

  • RoHS compliant

Features at a Glance
  • Board design based on the HIGH-SPEED DESIGN concept.  Low reflection is achieved by means of uniform signal surge impedance
  • Design features an energy buffering feature which works across the entire frequency range.  This guarantees improved reliability due to more stable supply voltages directly at each slot in conjunction with fluctuating loads
  • Continuous electrically conductive chassis GND surface located in the area where the backplane is mounted on the card rack.  An M3 screw connection is available to connect chassis ground. 

    By installing a connecting bracket or busbar, chassis GND can be connected to ground in a low-resistance star arrangement
  • Separate 6-pin JTAG boundary scan connector is standard Faster, simpler system initialization and testing via the JTAG bus when mounted in the chassis is achieved by direct access via an additional connector on the backplane
  • Main operating voltages are supplied via ATX connector, using the space behind an 8 HP wide CPU.  No space goes unused. 

    Additional busbars/screws standard for systems with a power consumption of more than 300W.  This permits each individual partial backplane to be supplied with power seperately
  • Rear I/O boards can be mounted in every slot
  • For specific part numbers, download the Catalog sheet
Custom Solutions

Hartmann Electronic has been designing custom analog, digital, and mixed signal high-speed boards for over 35 years, with over 5,000 custom designs to date. Using state of the art design tools and fully automated production equipment, we provide custom solutions that fulfill the most exacting requirements with maximum packaging density.

Learn about our custom backplane capabilities